logo

LS Harness Conversion Page 2

 
Figure 5
Figure 5

Figure 5. Pulling the loom off the main trunk after the C100 connector.

Figure 6
Figure 6

Figure 6. This is a harness holder that attaches to the intake manifold, it is taped to the harness. Carefully cut the tape and remove it.

Figure 7
Figure 7

Figure 7. Continue to pull the loom off the harness until you reach a branching point.

Figure 8
Figure 8

Figure 8. Here are the next brances of loom that will be removed from the harness.